Call us at

+49 6074 4099 0

Email us

info@georg-martin.de

Headquarter

Martinstrasse 55
63128 Dietzenbach Germany

High-precision Laminated Shims

Laminum® HP

Laminum HP Shims

High-precision laminated shims

When mounting sub-assemblies, tolerance compensation can be optimized to 10 micrometres with the Laminum® HP. The special feature of these shims is the combination of several peelable shims with a thickness of 0.05 mm with one or more final high-precision films of lesser thicknesses.

These high-precision films even serve as the last step in manual fine tuning when tolerances in the 25 µ and/or 10 µ range have to be compensated. The new combined Laminum® HP solution is a time and cost-optimized alternative to a spacer element laminated over its entire surface with 25µ films, as the expense and effort required for production are lower than with fully coated 0.025 millimetre laminates.

At the same time, Laminum® HP helps users to reach their goal more quickly, as peeling the thicker 0.05 mm films by hand is much faster.

Practical use of the high-precision shims in the mounting of sub-assemblies is also facilitated by the fact that the precision films have a small, slightly raised finger lift which can be easily recognised, thus making peeling much simpler.

Products

Precision shims

Concept

Laminated Peelable Shims

High-precision Laminated Shims

Solid Shims

Edge-connected Shims

Contact

Technical Sales - Management

Contact

Technical Sales

Product Overview

Georg Martin

Product Overview

Precision shims

Parts according to drawing

Laser-Cutting

Self-adhesive Metal Foils

Standard Solutions

Forming Technique

Top